China Chongqing Formanhao Trading Co., Ltd Company Cases

What’s the Difference Between Short Block and Long Block? The names are a bit misleading, since both engine types are similar in size. The components they carry, however, are very different from each other. Here’s what you need to know about the differences between these two engine types.   Short block engines   Short block engine packages usually include the engine block, crank, pistons and connecting rods, and it gets its name from its short list of components and short warranty. These are the basic components that are critical to a working engine. In some cases, short blocks can come with extras like camshafts and timing belts.    Long block engines   Long block engines get their name from the fact that they have a longer list of components. They contain the engine block, crank and pistons, just like the short block, but they also have a cylinder head, camshaft and valve train. In some cases, you’ll also get an oil pan and valve covers with your purchase.   Which engine should I choose?   Long block engines are generally best in situations where your vehicle needs a complete engine overhaul. You’ll get better reliability and performance from a long block vs. a short block.  

What is the cylinder head doing in my car?   The main task of the cylinder head is to close the combustion chamber of the engine from the top. The upper part of the engine is called the cylinder head, while the lower part is the engine block. The cylinder head sits on the engine and closes off the combustion chamber. The gap that remains between the cylinder head and the engine is completed by the head gasket.   Another task of the cylinder head is to ensure the constant lubrication of the cylinder. If the cylinders are not well-oiled, a smooth operation of the engine is not possible, which is why the cylinder head is an indispensable part of the function of the engine.   This is how a cylinder head is built   The cylinder head is not only a very important part of your engine, but also one of the most expensive parts of the vehicle's engine due to its complex structure. Since the cylinder head is exposed to very high temperatures during the combustion process, it consists of resistant aluminum alloys and light metals.   At the bottom, it is usually anchored directly to the crankshaft housing and closed at the top with a valve cover. Depending on whether your vehicle has a diesel or gasoline engine, the structure of the cylinder head differs.   These are the components of a cylinder head in a gasoline engine   Inlet and exhaust ducts: These ensure that the exhaust gas can escape from the cylinders and the absorbed air-fuel mixture can get into the cylinders Inlet and exhaust valves: This is where petrol engines suck an air-fuel mixture in, while exhaust gases are simultaneously transported to the exhaust system Camshafts: A crankshaft driven by the timing belt drives the camshafts. The camshafts are responsible for opening and closing the valves Injectors: They ensure that the fuel is injected into the combustion chambers Spark plugs: They initiate the combustion of the fuel   These are the components of a cylinder head in a diesel engine   Inlet and exhaust ducts: They allow exhaust gas to escape from the cylinders and allow the captured air-fuel mixture to enter the cylinders Inlet and exhaust valves: Diesel vehicles suck air in through the inlet and exhaust valves while exhaust gases are simultaneously transported to the exhaust system Camshafts: A crankshaft driven by the timing chain drives the camshafts. The camshafts are responsible for opening and closing the valves Injectors: These inject the fuel in diesel engines into the combustion chambers or antechambers Glow plugs: They act as a cold-start aid   Can the cylinder head get any defects?   Unfortunately, the complex structure of the cylinder head and its numerous tasks make it prone to defects. The most common defect is a leaking cylinder head gasket, which is caused by an increased abrasion.    There can also be defects on the cylinder head itself, for example, by the high temperatures and strong vibrations in a running engine. This can lead to cracks in the material of the cylinder head.   How to recognize signs of possible defects   The signs of cylinder head defects include:   You notice a power loss of the engine The cooling water temperature is in the red area You see oil in the cooling water You must refill water and oil after just a short time You notice a bad cold start behavior   How is the cylinder head cooled in the engine?   As already described, the cylinder head is exposed to high temperatures and must therefore be cooled in order to avoid overheating and increased abrasion. There are two different types of cylinder head cooling: cooling with water or with air.   Air-cooled cylinder heads   Air-cooled cylinder heads are only cooled by the passing air. In addition, they are equipped with a large cooling fins.   Water-cooled cylinder heads Most modern engines are cooled using water. For this purpose, a mixture of water and a frost agent is usually used as the cooling liquid. To cool the cylinder head, the coolant is passed through the cylinder head gasket into the cylinder head.   Water-cooled cylinder heads Most modern engines are cooled using water. For this purpose, a mixture of water and a frost agent is usually used as the cooling liquid. To cool the cylinder head, the coolant is passed through the cylinder head gasket into the cylinder head.   One of the advantages of this type of cooling is, above all, that the cooling liquid can absorb and also dissipate large amounts of heat. In addition, this cooling method is the most effective.